TEL: 0086 13091162987
Email: web@geitgroup.com
Roll forming machine Manufacturer from China.Welcome to GEIT GROUP
There are three driving types in our roll forming machine.They are Chain driving type,Gear driving type and Gearbox driving type.Next I will tell you more about chain driving type.It is the most commo···
GEIT GROUP is a drywall roll forming machine manufacture in China.The profiles for drywall constructions are apparently simple U- and C-shaped profiles or channels, which are used to provide support f···
The T-bar is a technical profile for supporting suspended ceiling panels.T-bar ceiling may also be referred to as a drop ceiling, false ceiling, suspended ceiling, grid ceiling, drop in ceiling, drop ···
We adopt the design of “3 supports&1 pressure”.There are 3 stainless steels below the steel plate to support it from dropping,and 1 stainless steel to press it from upwaring.So that the steel plate ···
When the thickness of the steel coil required by the customer is very thick(over 0.8mm), it is recommended to add a pressure arm to the decoiler to ensure the decoiler is smooth and the steel coil doe···
This is the stainless steel baffle of the hydraulic decoiler, which is used to prevent the direct contact between the coil and the machine in order to protect the machine. And the baffle is provided w···
The decoiler is one of the essential and important equipment in the production line. One of its functions is to support the steel coil by tightening the inner hole of the steel coil; The other is to s···
The trial operation of roll forming machine involves a lot of machine knowledge. Therefore, for the installation personnel, before the trial operation, they must be carefully familiar with the equipme···
English
اللغة العربية
