TEL: 0086 15612731108

How to Solve The Problem in The Process of Shearing System

Nov,07,2023 << Return list

After the floor decking sheet roll forming machine rolling the steel into standard shapes, there is a buffer time before the operating of shearing system . In general, after the upper and lower die closing, in order to ensure the quality of the product, the internal resilience of the steel will be maintained for a period of time.And after the deformation of steels is stable , the shearing system begins to operate,which can ensure the dimensional accuracy of the finished product.

1. The blade of the cutting knife is not sharp. What the problem is that when we process the cutting knife, the cutting edge is not polished to the standard roughness, or the angle of the cutting edge is wrong. The solution to this situation is to sharpen the cutting edge and adjust the angle of the cutting edge.

2. The gap between the upper and lower blades is not right, and the problem of the steel deck sheet profile machine is relatively easy to solve. When cutting plates of different thicknesses, the distance between the upper and lower blades is not the same. So the distance between the upper and lower cutting knives should be adjusted according to the thickness of different plates,which allows the incision to be smooth when it is cut.

Through the above content, I believe that friends have a understanding of the problem of the shear knife and the idea of solving the problem.

We are GEIT Group,a one-stop Chinese supplier for all kinds of cold roll forming machine,including glazed tile roofing sheet making machine,floor decking forming machine,ceiling system forming machine and so on.If you have any purchasing requirements,you can contact with us.We will provide you with best service and technical support.